Видео

thank you for the close ups and descriptions!

Where can I find all these parts? I've just got myself a t10

so any tuning, again = pretty much all internals thrown to garbage, wtf is this

How did you make the cuts for the wings?

Thank you. :)

Is the modify barrel 133mm? Trying to order one now. Want it to be correct.

Take my money. Just ordered a ssx23. Hopefully you've got all these bits in stock. Ordered the short hex suppressor yesterday 🎉

Hutchybhad ambushed me a few times.but I always miss him.as I think he is a garden knomb

Ed is literally a.god with his rifle and a thoroughly nice guy

Just found your channel, this video is one of the best I’ve seen on the MK23. Very well detailed and the explanations are great! I really want to get into silenced airsofting, but it’s all new to me I was originally going to get the TM LCP/ Bodyguard as I liked how small they were. But one of the mod’s doesn’t seem to work it’s more for looks, or maybe I’ve gotten that wrong? So I’m thinking of a MK23, I was going to go for the SSX as I’ve been told it’s the best out the box. But I can’t find any place in the U.K. retailing the SSX. So I’m thinking the TM is the way to go, the only thing putting me off is the mods. The trigger mod looks pretty hard to do. And is all the suppressor needing done is the tape, fart flap mod? And I’m I right in thinking .25 BBs out the box? Going to sub can’t wait for more videos! Edit, metal upgrade kits would be nice!

Near the end of your video where you covered the end of the barrel and fired it and had pressure until you removed your thumb, should this be the case on all vsr10 and clones? I have an ASG M40a3. I’m new to airsoft. Bought the gun second hand and apparently had a precision 6.02 barrel fitted with a pid rubber. I’ve put my thumb over the barrel and it did t hold pressure. I’m guessing this will reduce the guns power?

Mine head is not going that easy on it…

Question, I have the gas powered Tokyo Marui MK23 (non blowback). With that you have to use the slide for loading a shot in to the chamber. Does that let you operate the slide? It doesnt seem so 🤔

No consigo eso en mi m24 de A&K, le he puesto teflon a la cabeza de cilindro y a la goma del hop up y no consigo que comprima así….

Thank you for posting this vid, I have just upgraded my T10 with the very same hop. I'm not 100% happy with the results. But I'm pretty sure that is down to my inexperience.

Hey there! So i bought the ssx 430 modify barrel for my sniper and every shot was great until i have put 60-70 bbs through it. The bbs started going in all directions so i took the barrel out and there saw bb residue on the window. With the crazy jet i have never experienced this thing and i am using bls 0.45. I think the problem is the interior finish of the barrel, it is not that smooth like the crazy jet (i know it is coated and i hate that, thats why i wanted a new barrel ;) ) Have you experienced the same problem? Thanks!

Why are vsr 10 triggers so expensive . It’s more expensive than the gun I bought itself. Is it worth it?

I have a 150mm crazy jet barrel will I need to drill the outer barrel to fit it in

Will this work with the wolverine bolt?

Where does one look to find the nub to mod the hop arm? Thanks Patrick

How's it shoot out the box compared to it's heavier brothers?

Sick 👌

Can you help me please? I have a VSR-10 with an AirsoftPro cylinder which has a 22mm inner diameter. As far as i know it is slightly smaller than the TM compatible cylinder. The SSG10 has the same inner diameter like the Airsoftpro, so it is 22mm. So following this logic, the SSG10 version will be my choice right? Thank you for your answer!

37:15 broscience

My next trigger on my next vsr build.

Hello mate, just got your wasp piston for my VSR. What sleeve and air break do you recommend for a 2.32J build?

what's the max psi you can run on the mk23?

What cylinder are you using on your test build ?

Hi! I just bought one second hand recently And I'm concerned by the play there is with the spring guide stopper It can move forward and backward a lot compared to the other triggers i used to have before Does yours wobble too ? I can't really see it in the video, neither the amount of play there is The pin at the back of the spring guide stopper (the one that takes all the stress) is a bit loose on mine

Why are all ssg10 wasp pistons out of stock everywhere

Thank you!

New to this we're can l find a barrel cheers

Brilliant video, don’t suppose you have a video of you actually doing the modifications to ensure the parts fit?

I'm really struggling with removing the outer barrel. I've literally removed the top rail all together but the outer barrel is still not budging. Any ideas?

Pls recommend me some upgrades for the styer

Is there a reason you didn't put the hop adjustment lever thing back on? I bought one of these second hand, and it had pretty much identical upgrades, it also doesn't have the hop adjust lever after they upgraded to the same hop chamber... I wondered if there is a reason, or if it's a mistake. Mine shoots terribly, and I figured I need to adjust the hop, but I wasn't able to 😅😅

considering the cost TM the weapon which is MOST honest, im, or if you plan to mod to the absolute nines is a SSTI/ASG just better value

Hi, i got in to servis TM VSR10 with that trigger. After sandig edges of the cylinder, for nicer pull, i got problem with sear catching the piston. Before, it was working with no problems. The cylinder had alot ob side edge. So if I shimm trigger lets say 0.3 shims, will it be better or is somethin else? It v9.2 trigger.

Did you never upgraded it in the end? I look through your videos and didn't see a follow-up.

Nice video, thanks, your videos are very helpful in avoiding mistakes when upgrading parts. One thing though, please stop saying M K 23, it's a Mk23 (Mark23). Good job though, I'll be ordering some parts from Empire soon. I would like to put a long barrel in my Mk23, to extend through the suppressor, which one would you recommend. ❤

Thank you for offering your knowledge to us players and people who want to further take this hobby beyond OOTB. My field limit is 3Js with .3 as the limit, What kind of spring would you recommend?

Or is it stickers sorry lol 😂❤

Wait so did you just cut the designs out with paper?

Where do i get all the bits to do this

Hello, I just saw this review that made me very very clear and well explained the operation and its components. Now I want to do a project where according to me I could use this vsr 1 replica and you saw it some time ago or you have it.

kmcs 4.0 dark forest sucks ass

I live in Canada and can’t seem to find AGM in stock anywhere. Looks like it’s out of stock at a lot of places in the US and UK as well. Anyone know if they are still dealing with supply issues?

Nice review!!!

Is this also for SSG10 A3?

Blast from the past, but a brilliant video with awesome tips from SillyGhillie. The video clips are super useful. Thanks guys!